API
Changing the RF region of the Gateway
I. Prerequisites - Access to Network Manager in ThingPark wireless - LRR Id II. Instructions - Login into your ThingPark Wireless account through the GUI - Navigate to Network Manager - Search for the desired LRR or find it in the list - Click on the ...
Using ticket template to report an issue
In order to provide the best support to our customers we have added a ticket template in the support queue. whenever you create a new ticket please select the most appropriate ticket template. This will pre write some tickets information that will be ...
The DevAddr is short, how many sensors can there be in a given network ID ?
The DevAddr is very short, and the actual addressing space is even shorter considering that the first 7 bits are reserved for the network identifier allocated by the LoRa alliance. In a first analysis, this seems to imply that LoRaWAN networks have a ...
How to get a DevEUI IEEE MAC address and a AppEUI address ?
The LoRaWAN specification defines the unique address of all LoRaWAN sensors, the DevEUI, to be a valid IEEE address. It also defines the AppEUI, which may be used by the network server to identify the entity than can complete the OTA join process for ...
How to send MAC commands from an Application server to debug test devices ?
During testing of new device firmware, it may be useful to send MAC commands to check the behaviour of the network from an Application server.. Depending on the Connectivity plan associated to the device and the LRC settings, you may need to request ...
When performing range testing, disable Automatic Datarate (ADR) adaptation.
If you are performing a range testing session with a LoRa device, and you are walking are driving, you may get into connectivity problems while moving away from the nearest LoRa base station if you use a normal production connectivity plan. Normal ...
Base station backhaul link over cellular : impact of increased round-trip delay and acceptable range
After they have transmitted an uplink message, LoRaWAN class A devices open two short receive windows for downlink messages called Rx1 and Rx2. The default timers are 1s (Rx1 begins exactly 1s after last bit of the last uplink message has been ...